50HZ 16kW/20kVA Weichai WP2.3D25E200 Diesel Generator Set

16kW/20kVA Weichai  Diesel Generator Set 

1. Product Parameter Table

The following is the official standard parameter configuration of 50Hz 16kW/20kVA Weichai WP2.3D25E200 diesel generator set, which fully complies with ISO8528 industry standards and covers core operating data, engine and alternator specifications required for project bidding and equipment acceptance.

2. Core Product Features

This 16kW/20kVA Weichai diesel generator set equipped with WP2.3D25E200 original engine is a compact and high-efficiency small power generation equipment, which integrates Weichai’s mature industrial engine technology and reliable brushless alternator system. It is a mainstream low-power diesel generator widely used in civil and industrial auxiliary power scenarios, with outstanding stability, energy-saving performance and low maintenance cost.

First of all, the equipment adoptsoriginal Weichai WP2.3D25E200 water-cooled engine as the power core, with sufficient power reserve and stable power output. The engine is designed with a reinforced cast iron cylinder block and high-strength alloy crankshaft, with a design service life of up to 32,000 hours, effectively avoiding frequent failures during long-term continuous operation. Matching with professional electronic speed regulation technology, the generator set realizes stable frequency and voltage output, and the voltage regulation error is controlled within the industry standard range, which can adapt to the power demand of precision electrical equipment.

Secondly, the supporting brushless self-excited alternator is equipped with H-grade insulation and IP23 protection grade. Compared with traditional brushed generators, it has no carbon brush wear problem, greatly reducing daily maintenance frequency and failure rate. The H-grade strong insulation performance can resist high temperature and harsh operating environment, avoiding insulation aging and short-circuit faults caused by long-time load operation, and improving the overall safety of power supply.

In terms of fuel economy, the 20kVA small diesel generator set has a calibrated full-load fuel consumption of 6.2L/H. With the optimized fuel injection system and high-precision filter configuration, it maintains moderate and stable fuel consumption under long-term prime power operation. It avoids excessive fuel waste of traditional low-power generators, and reduces the daily operating cost of users. At the same time, the unit is equipped with a large-flow fuel filter and centrifugal rotor oil filter, with a filter replacement cycle of up to 500 hours, further saving later maintenance time and cost.

In terms of structural design, the whole machine is compact in size and light in weight, supporting open-frame conventional installation, and can also be upgraded with silent canopy, mobile trailer and other configurations according to demand. The base is equipped with professional shock absorbers, which can effectively reduce operating vibration and noise. The reserved maintenance windows on both sides of the engine body make daily inspection, oil replacement and fault maintenance more convenient, which is very suitable for unattended and frequent mobile power supply scenarios.

In addition, the unit has complete safety protection functions, including overvoltage, undervoltage, overfrequency, underfrequency, low oil pressure and high water temperature protection. It can automatically alarm and shut down in case of abnormal operating conditions, effectively protecting the engine and alternator from damage. It supports the optional installation of ATS automatic switching device and remote monitoring system, realizing automatic start-stop and unattended operation, which meets the intelligent power supply needs of modern projects.

3. Main Application Scenarios

As a high-cost-performance 16kW emergency diesel generator set, the Weichai WP2.3D25E200 generator set has strong scene adaptability, covering temporary power supply, standby emergency power supply and daily self-use power supply in multiple industries. It is the preferred power equipment for small and medium-sized power demand scenarios.

Construction and Municipal Engineering Scenarios: It is widely used for temporary power supply of urban municipal renovation, road construction, outdoor engineering construction and emergency municipal rush repair. It can stably supply power for small construction machinery, construction lighting, welding equipment and water pump equipment, solving the problem of no grid power or unstable grid power at the construction site. The mobile and portable design adapts to frequent site migration operations.

Commercial and Civil Emergency Scenarios: Suitable for shopping malls, office buildings, community supporting facilities, small hotels and other commercial places as emergency standby power supply. When the municipal power grid is cut off suddenly, it can quickly start up to ensure the normal operation of emergency lighting, fire control equipment, monitoring system and basic office equipment, avoiding economic losses and safety hazards caused by power failure.

Outdoor and Breeding Industry Scenarios: It is applicable to field geological exploration, forestry protection, outdoor breeding bases, fishery breeding farms and other remote areas without stable grid power. It can provide continuous daily power supply for breeding equipment, ventilation systems, living lighting and field operation equipment, solving the power shortage problem in remote outdoor scenarios.

Industrial Small Factory Scenarios: For small processing factories, workshop auxiliary equipment and warehouse power supply, it is used as a backup power source for grid power failure to ensure the continuous operation of small production equipment and reduce production shutdown losses. Its stable output performance can adapt to the intermittent load operation of small industrial equipment.

Communication and Public Service Scenarios: It can be used as standby power supply for small communication base stations, community service stations and roadside public facilities. It supports long-term low-load standby and instantaneous high-load start-up, ensuring the uninterrupted operation of basic public service equipment.

4. Core Usage

The core positioning of the 50Hz 16kW/20kVA Weichai WP2.3D25E200 diesel generator set is small-load long-term continuous power generation and short-time emergency peak power supply, which perfectly matches the power demand characteristics of small and medium-sized scenarios, and its core usage is divided into three major modules.

First, daily continuous self-use power supply. Relying on the 16kW prime continuous power capability, it can operate stably for a long time in off-grid scenarios, providing stable AC power for daily production, living and operation equipment of remote sites, breeding farms and outdoor engineering teams, and solving the problem of permanent power shortage in non-grid areas.

Second, grid failure emergency standby power supply. With 18kW/22.5kVA standby peak power, it can cope with instantaneous power surge demand during equipment start-up. It is mainly used as backup power for commercial, industrial and public facilities. It can start quickly after grid power failure to ensure the normal operation of key equipment and avoid power failure paralysis of the whole system.

Third, temporary mobile power supply for short-term projects. Benefiting from its compact structure and easy transportation, it is widely used for short-term power supply of municipal rush repair, temporary construction, outdoor activities and other projects. It has high flexibility, can be quickly deployed and put into use, and meets the temporary power demand of various mobile operation scenarios.

5. Common FAQ

FAQ 1: Is the 6.2L/H full-load fuel consumption of WP2.3D25E200 generator set normal?

This fuel consumption data is a standard and reasonable calibrated value for actual operation. The theoretical bench fuel consumption of the Weichai WP2.3D25E200 engine is 4.8-5.5L/H. The 6.2L/H parameter is the actual comprehensive fuel consumption including fan heat dissipation, filter resistance and full accessory load under ISO3046-1 standard working conditions (sea level, 25℃ ambient temperature). It is a conservative and practical data calculated according to the actual on-site operating environment, which avoids the problem of actual fuel consumption exceeding the theoretical value in complex working conditions, and is in line with the industry conventional parameter setting standards of small diesel generator sets.

FAQ 2: What is the difference between prime power and standby power of 16kW/20kVA generator set?

Prime power (16kW/20kVA) is the continuous operating power of the unit, which supports unlimited long-term operation and is the conventional power for daily power supply. Standby power (18kW/22.5kVA) is emergency peak power, only suitable for short-time instantaneous load increase and power failure emergency use, and cannot operate continuously for a long time. The 10% power margin between standby power and prime power is a standard configuration for industrial generator sets, which can effectively cope with equipment start-up impact load and ensure the stability of power supply system.

FAQ 3: What working environment is the IP23 protection grade and H-grade insulation suitable for?

IP23 protection grade can prevent solid foreign objects larger than 12mm and vertical rainwater splashing from invading the equipment, suitable for open-air construction sites, outdoor workshops and semi-open operating environments, with good dustproof and waterproof capabilities. H-grade insulation is the high-grade insulation for generator sets, which can withstand long-term high-temperature operation of the unit, effectively avoid insulation aging and breakdown, and adapt to high-temperature working environments up to 40℃. It greatly improves the stability and service life of the unit in harsh working conditions compared with conventional F-grade insulation.